ProductsBascaBrush

The operator places the container to be washed beneath the protective cover, then connects the return hose from the machine to the container’s tank valve. The brushing system is lowered by pressing the dual-button safety control, ensuring two-handed operation. The cover automatically stops when the brushing system reaches the correct position. If the machine is ATEX-rated, the operator must connect the grounding clamp before starting the cycle to ensure safety in explosive environments. Once setup is complete, pressing the START button will initiate the automated cleaning cycle.

After the START button is pressed, the Basca system performs a full sensor check to ensure all safety and operational parameters are met. Once validated, the machine begins the washing cycle. The washing fluid is drawn from its storage tank into a pump, then directed to the spray nozzles. The fluid is evenly sprayed across the inner tank surfaces, while rotating brushes vigorously clean the walls and bottom of the container. An electric motor powers the brush rotation, while dual pistons enable vertical movement to ensure full-contact cleaning. The washing fluid is filtered and recirculated in a closed-loop system until the cycle ends. Multiple customizable recipes allow the cleaning process to be tailored to different container types and fluid compositions, ensuring optimal results.

After the washing phase, the system automatically performs the rinsing cycle using clean fluid. This fluid is drawn either from a secondary storage tank or directly from the mains water supply, then injected through the main pump and distributed via the washing nozzles. The rinsing liquid is then filtered and either collected in the main washing fluid tank or directed to a dedicated recovery tank, depending on the system configuration. This ensures efficient rinsing with the option for fluid reuse or controlled discharge.

At the end of the cycle the machine stops and a visual signal on the control panel informs the operator. Now the container is clean and can be removed from the machine.

Basca machines are designed to be easy to operate and maintain. Each unit is equipped with integrated sensors and visual indicators that alert the operator when maintenance is required and clearly indicate what actions need to be taken. This smart system helps prevent downtime and ensures long-term performance.